20ml Bottle. Specially formulated for use on brass and aluminium moulds. Use very sparingly, one drop under the sprue plate is sufficient. Do not allow to get into the mould cavities. One bottle will last for years. Contents may settle, shake well before use.
One stick of Chamber Casting Alloy (CCA) made to the exact same formulation as Cerrosafe™. This is the best product for making a chamber/throat cast for determining the best cast bullet mould for your firearm. Full instructions are included. One stick weighs approximately 550 grams. Australian customers may choose to add additional products (up to 3kg) into the shopping cart for the same postage charge.
The Lyman Ingot Mould forms four, easy-to-use ingots that stack easily and weigh approx. 1lb each. The sides of the mould have a 30 degree draft for easy ejection of the ingots.
The ingot mould is supplied with a wooden handle which must be securely attached before use.
Rowell bottom pour ladle, holds ONE pound of alloy. Pours from the bottom of the melt for more consistent projectiles. The Rolls Royce of bullet casting ladles.
Please note that this is the SMALLER Rowell ladle.
Rowell bottom pour ladle, holds TWO pound of alloy. Pours from the bottom of the melt for more consistent projectiles. The Rolls Royce of bullet casting ladles.
Please note that this is the LARGER version of the Rowell Ladle.