Become a CBE member     |        Member Home     |  No one logged in.
Please select Country:
Shopping cart is empty.
For international orders, please ensure you have selected your region from the drop down box above before placing anything in your shopping cart.
If your region is not listed, please email us with your order to receive an invoice.
Due to supplier cost increases and the falling Australian dollar, unfortunately, CBE has had to increase the price of some products on 1 January 2019.
To help ease this price increase, we have decided to offer FREE POSTAGE on Australian orders over $200 for a limited time. Click on the FREE POST option at checkout - refunds will not be available if incorrect postage is selected!

 

This catalog has no sub-catalogs.
310 Cadet No. 2R Sample
310 Cadet No. 2R Sample
  • Price: $10.00
  • Attributes:
  • Other features:
  • Select:
  • 25 Count Sample Packet of CBE Mould Number 310 Cadet No. 2R.

    These projectiles are supplied for testing purposes to help make your choice of CBE 310 Cadet bullet mould easier.

    Projectiles are supplied "as cast" and as such will need to be lubricated with the bullet lube of your choice before loading.

    Projectiles are cast from 20-1 Lead/Tin alloy and weigh 126 grains.

    Sorry, at this point in time 

    FOR AUSTRALIAN CUSTOMERS ONLY

    Don't forget to add bullet lube to your order.

  • Qty:
317-125PB Sample
317-125PB Sample
  • Price: $10.00
  • Attributes:
  • Other features:
  • Select:
  • 25 Count Sample Packet of CBE Mould Number 317-125PB (310 Cadet).

    These projectiles are supplied for testing purposes to help make your choice of CBE 310 Cadet bullet mould easier.

    Projectiles are supplied "as cast" and as such will need to be lubricated with the bullet lube of your choice before loading.

    Projectiles are cast from 20-1 Lead/Tin alloy and weigh 130 grains.

    Sorry, at this point in time

    FOR AUSTRALIAN CUSTOMERS ONLY

    Don't forget to add bullet lube to your order.

  • Qty:
320-120H Sample
320-120H Sample
  • Price: $10.00
  • Attributes:
  • Other features:
  • Select:
  • 25 Count Sample Packet of CBE Mould Number 320-120H (310 Cadet).

    These projectiles are supplied for testing purposes to help make your choice of CBE 310 Cadet bullet mould easier.

    Projectiles are supplied "as cast" and as such will need to be lubricated with the bullet lube of your choice before loading.

    Projectiles are cast from 20-1 Lead/Tin alloy and weigh 120 grains.

    Sorry, at this point in time

    FOR AUSTRALIAN CUSTOMERS ONLY

    Don't forget to add bullet lube to your order.

  • Qty:
320-125FR Sample
320-125FR Sample
  • Price: $10.00
  • Attributes:
  • Other features:
  • Select:
  • 25 Count Sample Packet of CBE Mould Number 325-120FR (310 Cadet).

    These projectiles are supplied for testing purposes to help make your choice of CBE 310 Cadet bullet mould easier.

    Projectiles are supplied "as cast" and as such will need to be lubricated with the bullet lube of your choice before loading.

    Projectiles are cast from 20-1 Lead/Tin alloy and weigh 124 grains.

    Sorry, at this point in time

    FOR AUSTRALIAN CUSTOMERS ONLY

    Don't forget to add bullet lube to your order.

  • Qty:
Marvelux Flux
Marvelux Flux
  • Price: $20.00
  • Attributes:
  • Other features:
  • Select:
  • 1 Tub of Marvelux - 226g
  • Qty:
Bertram 310 Cadet Cases
Bertram 310 Cadet Cases
  • Price: $90.00
  • Attributes:
  • Other features:
  • Select:

  • Back in stock, ready to post!
    Package of 100 Bertram 310 Cadet unprimed cases. New lower price. Limited Stock!

    Unfortunately, we CANNOT send brass cases internationally.

    We can only sell to Australian customers.


  • Qty:
Sprue Plate Lube - 20ml squeeze bottle
Sprue Plate Lube - 20ml squeeze bottle
  • Price: $11.00
  • Attributes:
  • Other features:
  • Select:
  • 20ml Bottle. Specially formulated for use on brass and aluminium moulds. Use very sparingly, one drop under the sprue plate is sufficient. Do not allow to get into the mould cavities. One bottle will last for years. Contents may settle, shake well before use.
  • Qty:
Kal Bullet Mould Handle
Kal Bullet Mould Handle
  • Price: $90.00
  • Attributes:
  • Other features:
  • Select:
  • 1 Pair. Will fit all CBE single, double and triple cavity bullet moulds except HP and HB moulds and 4 cavity moulds, the mounting holes will need to be drilled out to 5mm for HP and HB moulds. A free service to CBE customers, just request it in the "Special Instructions" section at checkout.  High quality, heavy duty handles, will last a lifetime of service. Highly recommended.
  • Qty:
310 Cadet Starter Kit with Triple Cavity Mould
310 Cadet Starter Kit with Triple Cavity Mould
  • Price: $470.00
  • Attributes:
  • Other features:
    Select Mould Required
  • Select:
  • CBE has put together a starter kit of all the essential equipment to cast and load your own 310 Martini Cadet ammunition. This kit includes a triple cavity mould of your choice from the CBE collection, a set of high quality laser cut steel KAL mould handles, a three die set of Simplex Master (7/8" x 14tpi thread) reloading dies including shell holder and 100 Bertram unprimed 310 Cadet cases. The triple cavity starter kit would retail for over $AUD495.00 if all items are purchased separately. We are offering this kit at the discounted price of $AUD470.00 and we'll also throw in a 125ml bottle of 45-45-10 liquid bullet lubricant at no charge. (Unfortunately we cannot send the Starter Kits overseas.) All you need to do when ordering is to list the bullet style you want in the special instructions section during checkout.

    You can also downsize to a double cavity mould starter kit for $AUD440.00. Please select the number of cavities in the drop down box above (and don't forget to select the mould design you want from the drop-down box as well).


  • Qty:
Lee Commercial Bullet Mould Handle
Lee Commercial Bullet Mould Handle
  • Price: $44.00
  • Attributes:
  • Other features:
  • Select:
  • 1 Pair. Will fit all CBE Bullet Moulds except HP and HB moulds, the mounting holes will need to be drilled out to 5mm for HP and HB moulds. A free service to CBE customers, just request it in the "Special Instructions" section at checkout.


  • Qty:
Simplex Master 310 Cadet Reloading Die Set
Simplex Master 310 Cadet Reloading Die Set
  • Price: $150.00
  • Attributes:
  • Other features:
  • Select:
  • Australian Made Simplex Master (7/8 x 14 tpi) Reloading Die Set. This set is a three die set which includes full length sizing die, expander die (especially for Cast Bullets) and bullet seating die. Includes correct shell holder.

  • Qty:
310 Cadet #2 R Triple Cavity
310 Cadet #2 R Triple Cavity
  • Price: $175.00
  • Attributes: Heeled
  • Other features:
  • Select:
  • This is the best bullet choice for Bertram Brass, 125 grain weight"

    Bullet OAL - .670"

    Nose Length - .322"

    Nose diameter - .311"

    Heel diameter - .307"

    Bullet Diameter - .323"

    310 Cadet were featured as the June 2014 "Mould of the Month". To view more information regarding 310 moulds, please click here.

  • Qty: